Rectangular luminaire housing with integral fitter is extruded aluminum. Frameless tempered glass lens is hinged and secured in place with a single stainless steel quarter-turn fastener for tool-less relamping. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to tenon on pole with matching profile and secured with four socket head cap screws on top of the housing. Luminaire is available in single or twin back-to-back mounting configurations All hardware is stainless steel.
Horizontal lamp is positioned within the three piece hydro-formed facetted reflector with specular finish. Lens is clear tempered glass. Optional matte glass lens is available upon request. Luminaire emits zero uplight at 90? horizontal and above, and is suitable for use in all LEED lighting zones.
Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20?F (-30?C) at nominal line voltage. Ballast is UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated.
70w T6, G12 base ceramic metal halide
150w T6, G12 base ceramic metal halide
LUMINAIRE WEIGHT: 26 lbs
LUMINAIRE EPA: 1.6 sq. ft
Straight rectangular pole is 6.3" x 3.9" nominal and manufactured from seamless 6061 aluminum tubing and heat treated to produce a T6 temper. Nominal wall thickness is 0.236". Sides of the shaft are flat with 1/8" radiussed corners. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Two piece base cover is fabricated aluminum. Nominal pole height is 20'.
Straight rectangular pole is 6.3" x 4.7" nominal and manufactured from cold drawn over mandrel, electric-weld, mechanical rectangular steel tubing with nominal wall thickness of 0.197''. Sides of shaft are flat with 1/2" radiussed corners. Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 20'.
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: CSA Certified for Wet Locations
INGRESS PROTECTION: IP65
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.