Rectangular luminaire housing with integral fitter is fabricated aluminum with no visible welds. Frameless tempered glass lens is hinged and secured in place with a single stainless steel quarter-turn fastener for tool-less access to the optical compartment. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to tenon on pole with matching profile and secured with four socket head cap screws on top of the housing. Luminaire is available in single or twin back-to-back mounting configurations All hardware is stainless steel.
Optics include four individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
4 Modules: 144 watts
Type II - 3000K: 10136 lumens / B2-U0-G1
Type III - 3000K: 10252 lumens / B2-U0-G1
Type IV - 3000K: 9278 lumens / B2-U0-G2
Type II - 4000K: 10795 lumens / B2-U0-G2
Type III - 4000K: 10918 lumens / B3-U0-G1
Type IV - 4000K: 9882 lumens / B2-U0-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 144 watts. Optional 0-10v DC dimming is available on request.
LUMINAIRE WEIGHT: 26 lbs
LUMINAIRE EPA: 1.6 sq. ft
Straight rectangular pole is 6.3" x 4.7" nominal and manufactured from cold drawn over mandrel, electric-weld, mechanical rectangular steel tubing with nominal wall thickness of 0.197''. Sides of shaft are flat with 1/2" radiussed corners. Pole shall show no seam along shaft. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 26'.
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: CSA Certified for Wet Locations
INGRESS PROTECTION: IP65
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.