Rectangular luminaire housing with integral fitter is extruded aluminum. Frameless tempered glass lens is hinged and secured in place with a single stainless steel quarter-turn fastener for tool-less relamping. Lens seals to the housing with one-piece silicone gasketing when closed. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire mounts to tenon on pole and secured with four socket head cap screws on top of the housing. Luminaire is available in single or twin back-to-back mounting configurations. All hardware is stainless steel.
Horizontal lamp is positioned within the formed anodized aluminum reflector with specular finish. Lens is clear tempered glass. Optional matte glass lens is available upon request.
1 X 55w: B1-U1-G1
2 X 55w: B2-U2-G1
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 98% and nominal ballast factor of 0.98. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to 0?F (-18?C) at nominal line voltage and frequency of ?10%. Ballast shall be UL and CSA recognized. 2G11 lamp socket is 75w-600v rated.
1 X 55w PL-L Compact Fluorescent
2 x 55w PL-L Compact Fluorescent
LUMINAIRE WEIGHT: 22 lbs
LUMINAIRE EPA: 1.3 sq. ft
Straight rectangular pole is 6.3" x 3.9" nominal and manufactured from seamless 6061 aluminum tubing and heat treated to produce a T6 temper. Nominal wall thickness is 0.236". Sides of the shaft are flat with 1/8" radiussed corners. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8"' and includes triangular tamper-resistant locking device. Two piece base cover is fabricated aluminum. Nominal pole height is 15'.
Straight rectangular pole is 6.3" x 3.5" nominal and manufactured from cold drawn over mandrel, electric weld, mechanical steel tubing with nominal wall thickness of 0.197". Sides of shaft are flat with 1/2" radiussed corners. Pole shall show no seam along the shaft. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two piece base cover is fabricated aluminum. Nominal pole height is 15'.
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
CERTIFICATION: CSA Certified for Wet Locations
INGRESS PROTECTION: IP65
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.