Heavy-duty fabricated steel cylindrical housing with integrated tenon houses the primary reflector and electrical components. Angular secondary reflector bracket of welded construction is fabricated from two parallel structural steel plates separated by steel spacers and secured to luminaire housing with two stainless steel socket head bolts. Secondary reflector bracket supports the formed aluminum roof, housing the secondary reflector system. Lens assembly consists of machined 3/4'' thick tempered glass lens with exposed edge bonded to precision machined anodized aluminum lens ring. Lens ring assembly is fastened to housing with three recessed setscrews. Housing and secondary reflector bracket are hot-dip galvanized, then lightly sanded prior to painting. All hardware is stainless steel.
Square primary reflector system with elliptical profile and segmented construction is formed from high-reflectance anodized aluminum. Reflector and single aluminum base COB diode is nested within the top of the luminaire and works in conjunction with secondary reflector described below. Machined tempered glass lens is low iron. Secondary reflector is composed of specially formulated injection molded plastic modules, consisting of nine facets each. Facet curvatures shall vary according to position within the secondary reflector, producing Type V square distribution with cut-off better than 60°. Facet surfaces are vacuum metallized for specularity and finished with double layer of protective clear coat. Secondary reflector shall have 64 modules consisting of 576 individual facets. CRI is 80+.
Universal driver accepts input voltage range from 120v to 277v at 50/60Hz. Electronic LED driver supplies 1050mA drive current to the single COB LED. Power consumption is 62 watts. Power factor is greater than 0.90. Driver shall be UL Recognized
DELIVERED LUMENS / BUG RATING (upgrade pending)
3000K: 4750 lumens / B2-U3-G0
4000K: 4893 lumens / B2-U3-G0
LED is included.
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE EPA: 3.7 sq ft
LUMINAIRE WEIGHT: 135 lbs
Inverted tapered steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Pole tapers from 6.6'' O.D. at top of pole to 3.7'' O.D. at the base. Pole has internal fitter plug welded at the top of the pole, and forms a reveal when the luminaire is installed. Two rows of four recessed stainless steel setscrews secure luminaire to pole. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 10'. Soil insert is required.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
INGRESS PROTECTION: IP54
CSA Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.