Luminaire housing, cover, and slipfitter are cast aluminum. Luminaire cover provides top access to electrical components and optics. Flat lens with decorative screen-printing is clear tempered glass and bonded to housing with silicone for a weather tight seal. Brushed stainless steel fascia surrounds the luminaire for aesthetic appearance. Housing is fitted with stainless steel weather-tight strain relief bushing for power cable exiting rear of the luminaire. Luminaire slipfitter mounts to the pole top tenon, maintaining a consistent outside diameter in the transition to the pole. All hardware is stainless steel.
Optics include choice of two or three LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions are available as a Type II, Type III, or Type IV. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones.
LED DELIVERED LUMEN OUTPUT / BUG RATING
2 Modules: 72 watts
Type II - 3000K: 5068 lumens / B1-U0-G1
Type III - 3000K: 5126 lumens / B1-U0-G1
Type IV - 3000K: 4639 lumens / B1-U0-G1
Type II - 4000K: 5398 lumens / B1-U0-G1
Type III - 4000K: 5459 lumens / B2-U0-G1
Type IV - 4000K: 4941 lumens / B1-U0-G1
3 Modules: 108 watts
Type II - 3000K: 7602 lumens / B1-U0-G1
Type III - 3000K: 7689 lumens / B2-U0-G1
Type IV - 3000K: 6959 lumens / B2-U-G1
Type II - 4000K: 8096 lumens / B2-U0-G1
Type III - 4000K: 8189 lumens / B2-U0-G1
Type IV - 4000K: 7411 lumens / B2-U0-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Optional 0-10v DC dimming is available on request.
Straight round pole is manufactured from cold drawn over mandrel, electric weld, mechanical steel tubing with nominal wall thickness of 0.142". Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and include triangular tamper-resistant locking device. Nominal pole heights are 15' or 20'.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
LUMINAIRE WEIGHT: 38 lbs
LUMINAIRE EPA: 0.33 sq ft
INGRESS PROTECTION: IP65
Limited product warranty period including the LEDs is five years. Driver shall carry the manufacturer's limited warranty.