One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap screws. All hardware is stainless steel.
Optics include a choice of two or three individual LED modules. Each module consists of a field replaceable aluminum core PCB with four high-power LEDs and a single piece lens molded from optical quality acrylic. Light distributions include a choice of Type II, III, or IV optics. Luminaire emits zero uplight at 90 degrees horizontal and above and is suitable for use in all LEED lighting zones. CRI is 80+.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Based on standard 5 degree tilt.
For 0 degree tilt option, U rating = 0.
Type II: 5068 lumens / B1-U1-G1
Type III: 5126 lumens / B1-U1-G1
Type IV: 4639 lumens / B1-U1-G1
Type II: 7602 lumens / B1-U1-G1
Type III: 7689 lumens / B2-U1-G1
Type IV: 6959 lumens / B1-U1-G2
Type II: 5398 lumens / B1-U1-G1
Type III: 5459 lumens / B1-U1-G1
Type IV: 4941 lumens / B1-U1-G1
Type II: 8096 lumens / B1-U1-G1
Type III: 8189 lumens / B2-U1-G1
Type IV: 7411 lumens / B1-U1-G2
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Electronic LED driver supplies 700mA drive current to LED modules with input voltage range from 120v through 277v at 50/60Hz. Power consumption is 72 watts for models with two modules and 108 watts for models with three modules. Optional 0-10v DC dimming is available on request.
Fabricated aluminum bracket arm bolts to to the pole 3.5' from the top with two stainless steel fasteners. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Round and curved steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover with tamper-proof fasteners is fabricated from 0.080'' spun aluminum and finished to match the pole. Nominal pole height of 23'.
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
INGRESS PROTECTION: IP65
UL Listed for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.