Luminaire housing with integral fitter is cast aluminum. Four vertical rods fastened to the housing support the optical system and act as a wire way to provide power to the lamp socket. Conical lens is clear acrylic and sealed with one-piece silicone gaskets to provide a weather tight seal when closed. Spun aluminum roof includes an integral decorative perforated stainless steel fascia which surrounds the reflector when closed. A stainless steel thumbscrew secures the roof, allowing tool-less access to the luminiare. Luminaire mounts to tenon on pole and secured with two offset rows of three regressed setscrews. Luminaire slip fits over 3" OD tenon with insertion depth of 4.2". All hardware is stainless steel.
Vertical lamp is positioned within the facetted reflector for optimal distribution. Reflector is formed from high-reflectance pre-anodized aluminum with textured micro-surface to efficiently distribute light and minimize brightness. Specify Type V or Type III distribution pattern. Conical lens is clear acrylic.
Electronic ballast is located in the base of the luminaire housing. Powerpack may be replaced via a quick disconnect for easy maintenance. Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage. Ballast is UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING / DISTRIBUTION / BUG RATING
70w T6 ceramic metal halide - CDM70/T6/830 - Type III - B2-U3-G2
70w T6 ceramic metal halide - CDM70/T6/830 - Type V - B2-U3-G1
150w T6 ceramic metal halide - CDM150/T6/830 - Type III - B3-U3-G3
150w T6 ceramic metal halide - CDM150/T6/830 - Type V - B3-U3-G2
LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 2.3 sq ft
Steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142" . Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole heights are 10' or 12' with 4" outside diameter.
Aluminum pole is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.187". Pole is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10' or 12' with 4" outside diameter.
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.