Luminaire housing with integral fitter is cast aluminum. Four vertical rods fastened to the housing support the optical system and act as a wire way to provide power to the LED engine. Conical lens is clear acrylic and sealed with one-piece silicone gaskets to provide a weather-tight seal when closed. Spun aluminum roof includes an integral decorative perforated stainless steel fascia which surrounds the LED modules when closed. A stainless steel thumbscrew secures the roof to the luminaire, allowing tool-less access for servicing. Luminaire mounts to tenon on pole and secured with two offset rows of three regressed setscrews. Luminaire slip fits over 3" OD tenon with insertion depth of 4.2". All hardware is stainless steel.
Optics include one or two LED modules mounted within clear acrylic conical lens. The modules consist of an aluminum core PCB with fourteen high-power LEDs and a single piece prismatic lens molded from optical quality acrylic. The prismatic lens redirects light output from the individual LEDs and is available in two distributions as a Type II distribution (S optics) or Type III distribution (ME optics). Models with two modules offer Type II or Type III distributions, or symmetric rectangular distributions when the individual modules are factory set in a back-to-back configuration as SS optics (back-to-back Type II modules) or SME optics (back-to-back Type III modules). Choice of color temperatures includes 3000K or 4000K with a CRI of 80+.
Electronic LED driver supplies 500mA drive current to LED modules with input voltage range from 120v to 277v at 50/60Hz. Power consumption is 25 watts for single module or 50 watts for two modules.
LED DELIVERED LUMEN OUTPUT / BUG RATING
Single Module - Asymmetric
3000K - Type II = 1980 lumens B1-U3-G1 / Type III = 1936 lumens B1-U3-G1
4000K - Type II = 2257 lumens B1-U3-G1 / Type III = 2208 lumens B1-U3-G1
Two Modules - Asymmetric
3000K - Type II = 3958 lumens B1-U3-G2 / Type III = 3872 lumens B1-U3-G2
4000K - Type II = 4511 lumens B2-U3-G2 / Type III = 4416 lumens B1-U3-G2
Two Modules - Back-to-Back Symmetric
3000K - Type II = 4033 lumens B2-U3-G2 / Type III = 4010 lumens B2-U3-G2
4000K - Type II = 4598 lumens B2-U3-G2 / Type III = 4573 lumens B2-U3-G2
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 25 lbs
LUMINAIRE EPA: 2.3 sq ft
Steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142" . Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole heights are 10' or 12' with 4" outside diameter.
Aluminum pole is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.187". Pole is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Tenon is machined to match the inside diameter of the pole, then inserted into the pole shaft and plug welded, showing no visible weld at the transition. One-piece base cover is 0.080" spun aluminum and finished to match the pole. Nominal pole height is 10' or 12' with 4" outside diameter.
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
INGRESS PROTECTION: IP65
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.