Luminaire housing with integral ballast assembly is cast from high-grade aluminum alloy with heavy cooling fins to enhance heat dissipation. Doorframe is one-piece cast aluminum and hinged for easy maintenance. Machined tempered glass lens is mechanically retained and bonded to the doorframe forming a flush fit to the exterior surface. Door assembly is sealed with closed cell silicone gasketing and secured by two captive socket head cap screws. Reflector sail with integral ribbing is cast aluminum and supported by two cast aluminum stanchions. Stanchion mounting holes in the housing are machined and fitted with stainless steel helical thread inserts. Cast aluminum slipfitter bolts to housing with four socket head bolts. Slipfitter mounts to 3'' O.D. pole and has built-in stop to limit insertion depth to 4.7''. Two offset rows of three recessed setscrews secure and level luminaire to the pole. All hardware is stainless steel.
Horizontal lamp is housed in specular anodized aluminum reflector, laser cut for precise reproduction. Sail reflector material is profiled matte anodized aluminum and is mechanically retained and bonded to the adjustable sail. Sail is field adjustable to 0°, 15°, 30°, 45°, or 60° above horizontal and fixed in place with stainless steel locking screws. Precision-machined anodized aluminum adjustment knobs securely lock the sail in place.
Ceramic metal halide core and coil ballast with class ''H'' (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 porcelain sockets is 660w-600v, 5kV pulse rated.
150w T6 ceramic metal halide - CDM150/T6/830
70w T6 ceramic metal halide - CDM70/T6/830
BUG RATING (150w) - SAIL ANGLE:
0° - B1-U5-G1
15° - B1-U5-G3
30° - B0-U5-G4
45° - B0-U5-G4
60° - B0-U5-G3
STEEL: Round tapered steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142''. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover is 0.080'' spun aluminum and finished to match the pole. Nominal pole height is 13'. Twin mount bracket assembly is fabricated from steel, then hot-dip galvanized. Slip fitter has internal stop to limit insertion depth to 5.9''. Assembly slip fits 3'' O.D. pole and is secured with two rows of three 10mm stainless steel setscrews.
ALUMINUM: Round tapered aluminum pole for single mount configurations only is spun tapered from 6061 aluminum alloy tubing and heat treated to produce a T6 temper after final welding. Shaft diameter tapers from 4.5" OD at the base to 3" OD at the pole top. Nominal wall thickness is 0.188" with an overall nominal pole height of 13'. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8" and includes triangular tamper-resistant locking device. Two-piece base cover is 0.080" spun aluminum and finished to match the pole.
LUMINAIRE WEIGHT: 56 LBS
LUMINAIRE EPA: 3.9 SQ FT
Housing is cleaned in an ultrasonic detergent bath prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
INGRESS PROTECTION: IP54
UL Listed for Wet Locations
Limited product warranty period is three years. Lamps and ballasts shall carry the respective manufacturer's limited warranty.