One-piece cylindrical luminaire housing with integral cooling grooves and lens ring are precision-machined from 6082 billet aluminum, then satin anodized. Lens ring fits flush to the housing and retains the lens with three socket head cap screws. One-piece closed cell silicone gasketing provides a weather-tight seal when closed. Anodized spun aluminum shade is supported by four formed aluminum support struts welded to an attachment ring. Shade assembly mounts to the luminaire housing and is secured with four recessed setscrews. Housing fastens to an internal mounting plate in the pole top and is sealed to the pole with a one-piece closed-cell silicone gasket. Electrical components mount to plate on the underside of the housing and are housed in the top of the pole. All hardware is stainless steel.
Heat-resistant semi-spherical borosilicate lens has matte inner surface. Metal halide model uses facetted specular aluminum reflector with vertical base down T6, G12 base lamp.
Ceramic metal halide core and coil ballast with class ''H'' (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 porcelain socket is 660w-600v, 5kV pulse rated.
BUG RATING: B1-U4-G1
70w T6 ceramic metal halide - CDM70/T6/830
39w T6 ceramic metal halide - CDM35/T6/830
LUMINAIRE WEIGHT: 14 lbs
LUMINAIRE EPA: 0.7 sq ft
POLE WEIGHT: 105 lbs
Inverted tapered steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157''. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Circular collar welded at the base of the pole provides transition between the round beveled flange plate and pole shaft. Luminaire mounting plate, welded inside the pole top, is drilled and tapped to accept fasteners for securing the luminaire. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 7.5'. Pole mounts to anchor base plate assembly with four M12 x 20mm stainless steel socket head cap screws and washers.
Anchor base assembly consists of four 1/2'' x 15'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
Housing is satin anodized aluminum. Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
CERTIFICATION: UL Listed for Wet Locations
INGRESS PROTECTION: IP54
Limited product warranty period is three years. Lamp and ballast shall carry the manufacturer's limited warranty.