Tempered glass lens is 0.40'' thick and bonded to the zinc plated steel luminaire housing providing a sealed enclosure. Exterior surface of lens is patterned with anti-slip squares produced from ceramic-based paint applied during the glass tempering process. Underside of lens is sandblasted and has matching square pattern screen-printed to the surface. LED light engine housing is constructed of zinc plated steel with special diffuser. All internal components are sealed to prevent moisture entry. Luminaire mounts onto adjustable luminaire supports consisting of stainless steel threaded rods and leveling pads secured to zinc plated steel mounting plate. Four luminaire supports are adjustable to allow overall height range of 2.4" to 5.5" to compensate for floor thickness. Luminaire is supplied with removable hot-dip galvanized steel form for rough-in installation. Recessed mounting plates and removable form may be preshipped upon request. Ingress Protection: IP67.
Low wattage LED's provide even illumination across the entire lens surface.
Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F).
Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional 3 channel dimming module and RGB color sequencer, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).
Maximum power consumption is 5 watts.
NOTE : Due to rapid and continuous advances in solid state lighting technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. HessAmerica cannot guarantee consistency in color, color temperature, CRI, or brightness when matching existing luminaires due to lumen depreciation and improvements in existing technology.
Limited product warranty period including the LEDs is five years. LED power supply (ordered separately), optional 3- channel dimmer, and optional RGB color sequencer shall carry the respective manufacturer's limited warranty.