Clear tempered glass lens with decorative ceramic masking is 0.47" thick and bonded to 316L square stainless steel trim ring with high-grade automotive quality adhesive with UV, acid, and alkali resistance properties. Lens assembly fastens to the housing from the underside with stainless steel hardware. Single piece nitrile gasket provides weather-tight seal between the lens assembly and housing. Heavy wall luminaire housing is cast from Anticorodal aluminum alloy and finished with proprietary epoxy based powder coat finish. Housing is void of threads to prevent scratching of the paint and potential resulting corrosion. Underside of housing is protected from abrasions with Teflon pads at contact points to the factory-supplied PVC installation steel. Weather tight bushing is supplied for the power cord.
Choice of optics include symmetric and asymmetric distribution patterns. Reflector assembly is regressed within the housing away from the primary lens and separated by an internal infrared lens to minimize external lens temperature. Symmetric distribution may be tilted +/- 10? and are horizontally rotatable.
Choice of optics include symmetric distributions with beam spreads of 16?, 35?, and 55?, respectively. Symmetric distributions may be specified with optional concentric ring louver. An asymmetric distribution is also available.
Wattage: 70 watt / 39 watt / 20 watt
16? Beam - no louver: B0-U5-G0 / B0-U5-G0 / B0-U4-G0
16? Beam - w/ louver: B0-U5-G0 / B0-U5-G0 / B0-U4-G0
35? Beam - no louver: B0-U5-G0 / B0-U5-G0 / B0-U5-G0
35? Beam - w/ louver: B0-U5-G0 / B0-U5-G0 / B0-U4-G0
55? Beam - no louver: B0-U5-G0 / B0-U5-G0 / B0-U4-G0
Asymmetric beam: B0-U5-G0 / B0-U5-G0 / B0-U4-G0
Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20?F (-30?C) at nominal line voltage. Ballast is UL and CSA recognized. Porcelain socket is 660w-600v, 4kV pulse rated.
70w T6 ceramic metal halide - CDM70/T6/830
39w T6 ceramic metal halide - CDM35/T6/830
20w T6 ceramic metal halide - CDM Elite 20/T6/830
Luminaire mounts into PVC installation sleeve and is retained in place via stainless steel spring clips. Installation sleeve may be pre-shipped on request.
Housing is cleaned in an ultrasonic detergent bath prior to painting. Standard housing finish is proprietary epoxy based powder coat paint and is not visible when installed.
Limited product warranty period is three years. Lamp and ballasts shall carry the manufacturer's limited warranty.