Luminaire base is cast aluminum and is secured to pole top with concealed hardware. Matte acrylic cylindrical lens twists and locks onto housing without the use of tools. Satin anodized rings surround the reflector at the top of the lens compartment as a decorative element. Lens is sealed to the housing with silicone gasket.
LED module consists of four vertically oriented LED arrays mounted to a square profile aluminum extrusion with internal fins. Matte acrylic lens diffuses the individual LEDs while minimizing brightness of the diodes.
Electrical components are mounted in the electrical compartment at the base of the luminaire housing. Two electronic LED drivers supply 700mA drive current to two linear LED circuit boards, respectively. Each driver has a universal input voltage range from 120v to 277v at 50/60Hz. Drivers are high power factor with performance greater than 90%. Power consumption is 56 watts. Optional 0-10v dimming available on request.
3000K: 4918 lumens
4000K: 6098 lumens
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for current technical data.
Aluminum column is manufactured from seamless 6061 aluminum tubing with nominal wall thickness of 0.196'' and is heat treated to produce a T6 temper. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular tamper-resistant locking device. Standard mounting is with internal flange and anchor bolts. Optional external flange with anchor bolts and base cover available on request. One-piece base cover is 0.080'' spun aluminum and finished to match the pole. Nominal column height is 14.5'
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.