Column is fabricated from high strength 6061-T6 extruded aluminum alloy with nominal thickness of 0.187" and cross-section of 12" x 3". Ringed lens is optical quality acrylic surrounded by machined aluminum bezels with satin anodized finish on both sides of the column. Top plate for access to light engine is machined aluminum with beveled edges and secured with tamper-resistant countersunk screws. All hardware is stainless steel. Overall column height may be 8' or 10'.
Four high power LED light engines concealed within the top of the column shaft project light through the clear acrylic ringed lens. Satin anodized bezels surrounding the lens aid in reflecting light outward to produce a bi-directional Type IV distribution.
Optional marker lights at the base of the column provide added pathway illumination with diffused or controlled optics. The optional marker lights in clusters of the three are available on one or two sides of narrow width of the column. Controlled optics may be asymmetric or forward throw distributions.
DELIVERED LUMEN OUTPUT / BUG RATING - MAIN OPTIC
3000K: 1546 lumens / B1-U3-G1
4000K: 1665 lumens / B1-U3-G1
DELIVERED LUMEN OUTPUT / BUG RATING - MARKER LIGHT
A1: 787 lumens / B0-U3-G2
A2: 1574 lumens / B1-U3-G2
FT1: 810 lumens / B0-U3-G2
FT2: 1621 lumens / B1-U3-G2
A1: 866 lumens / B0-U3-G2
A2: 1732 lumens / B1-U3-G2
FT1: 891 lumens / B0-U3-G2
FT2: 1783 lumens / B1-U4-G2
UL recognized electronic LED drivers supply 700 mA drive current to the LEDs. Universal driver accepts 120v through 277v input voltage at 50/60 Hz. Power consumption is 38 watts. Optional marker lights are driven at 350mA and consume 9 watts per side.
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory to confirm current technical data.
Column mounts to concealed mounting plate assembly. Mounting plate assembly consists of fabricated aluminum mounting base which installs onto four hot-dip galvanized anchor rods embedded in concrete foundation provided by others. Column secures to the mounting assembly with two recessed setscrews.
Standard finishes are finely textured dark grey, graphite grey, or matte silver grey metallic. Special colors are available on request.
CSA/US Certified for Wet Location.
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.