Square profile base with horizontal cut at top of shaft is constructed from 0.118'' nominal wall aluminum tubing. Lens is impact-resistant matte acrylic. LEDs and driver are mounted in the shaft at the bottom of the lens. Lens assembly is secured with stainless steel socket head cap screws inside the base. Fabricated aluminum top cap houses the diffuse aluminum reflector plate and is gasketed to create a weather-tight seal to the lens. Top cap mounts to the lens with two recessed setscrews. All hardware is stainless steel.
Single chip-on-board (CoB) with reflective optics projects light upward to evenly illuminate the cylindrical matte acrylic lens. Top mounted reflector element contributes to the uniformity of illumination at the top of the lens.
Universal LED driver is mounted in a weather-proof enclosure at the base of the column. Input voltage to universal driver is 120v through 277v AC, 50/60 Hz. Maximum power consumption is 12 watts. LED driver supplies 350mA to LEDs.
LED OUTPUT / BUG RATING
3000K - 689 delivered lumens / B0-U3-G1
4000K - 780 delivered lumens / B0-U3-G1
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.
Internal flange mounts to four 1/2" x 15" x 3" hot-dip galvanized anchor bolts embedded in a concrete foundation provided by others.
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
CSA/US Certified for Wet Locations
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.