One-piece luminaire base housing is precision-machined from 6060 billet aluminum, then satin anodized. Cylindrical matte acrylic lens mounts to luminaire base and is secured with three button head cap screws. Luminaire assembly fastens to the one-piece cast aluminum inverted tapered bollard shaft with three concealed socket head cap screws and is sealed with one-piece closed cell silicone gasket. Electronic ballast mounts to bracket on the underside of the housing and is housed in the top of the bracket. All hardware is stainless steel.
Vertical, base down lamp is positioned within the cylindrical matte acrylic lens producing symmetrical distribution.
BUG RATING: B0-U3-G1
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
26w PL-C / CFQ26W/G24q/835
Inverted tapered bollard shaft with integral flange plate is cast aluminum with nominal wall thickness of 0.24''. Bollard shaft mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws. Anchor base assembly consists of four 3/8'' x 10'' x 1-1/2'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others). See pole data sheet for mounting details.
Housing is satin anodized aluminum. Standard finish for bollard shaft is finely textured matte silver gray metallic. Special colors available on request.
WEIGHT: 12 lbs
Limited product warranty period is three years. Lamp and transformer shall carry the manufacturer's limited warranty.
UL Listed for Wet Locations