Two 6060 aluminum alloy sidewalls attach to opposite sides of the square cast aluminum base with concealed hardware. Sidewalls are 0.60'' thick and have two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has two white acrylic panels bonded to the outer surface to align the lens assembly to the luminaire. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to 0.197'' thick wall extruded square aluminum shaft with two concealed socket head cap screws. All hardware is stainless steel.
Base down lamp is positioned within the matte acrylic cylindrical lens providing soft diffused illumination.
B0-U3-G1 for all variants
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
13w PL-C - CFQ13W/G24q with G24q-1 base
18w PL-T - CFTR18W/GX24q with GX24q-2 base
Shaft is secured to concrete foundation (by others) with two concealed 3/8'' x 8'' x 1.5'' hot-dip galvanized anchor bolts and nuts. Luminaire is then installed to shaft with concealed stainless steel socket head cap screws.
WEIGHT: 14 lbs
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer's limited warranty.