Luminaire consists of cylindrical housing, base, and top cap precision machined from 6060 aluminum. Cylindrical housing is machined from tubing with nominal wall thickness of 0.60'' and mounts over the precision-machined luminaire base with three concealed socket head cap screws. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. Luminaire mounts to 0.197'' thick wall extruded aluminum shaft with three concealed socket head cap screws. All hardware is stainless steel.
Base down lamp is positioned within the matte acrylic cylindrical lens providing 360-degree distribution through housing aperture.
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
LAMPING / BUG RATING
13w PL-C - CFQ13W/G24q with G24q-1 base / B0-U3-G1
18w PL-T - CFTR18W/GX24q with GX24q-2 base / B0-U3-G1
Bollard mounts to anchor base plate assembly with three M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of three 1/2'' x 15'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
WEIGHT: 22 lbs
Standard finishes are finely textured matte silver grey metallic, dark grey, graphite grey, matte black, or dark bronze. Special colors available on request.
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer's limited warranty.