Single 6060 aluminum alloy rear sidewall and front ledge mount to the square cast aluminum base with concealed hardware. Sidewall and ledge are 0.60'' thick. Sidewall has two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has single white acrylic panel bonded to the outer surface to align the lens assembly to the luminaire sidewall. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to 0.197'' thick wall extruded aluminum shaft with two concealed socket head cap screws. All hardware is stainless steel.
Base down lamp is positioned within the matte acrylic cubic lens providing soft diffused illumination.
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20?F (-30?C) at nominal line voltage ?10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
13w PL-C - CFQ13W/G24q with G24q-1 base
18w PL-T - CFTR18W/GX24q with GX24q-2 base
BUG RATING: B0-U3-G1
WEIGHT: 17 lbs
Bollard mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of four 1/2'' x 17'' x 3'' hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer's limited warranty.